minor changes

soc/software/pmod_spi_test/Makefile

@@ -1,3 +1,4 @@
 TARGET := pmod_spi_test
+APP_SRCS := pmod_spi_test.c
 BSP_SRCS := init.c uart.c plic.c irq.c spi_flash.c pmod_spi.c
 include ../common/app.mk

soc/software/pmod_spi_test/build/build_config.txt

@@ -0,0 +1,12 @@
+MARCH=rv64imafdc_zicsr_zifencei
+MABI=lp64d
+BSP_UART_CLOCK_HZ=100000000
+BSP_UART_BAUDRATE=115200
+BSP_CLINT_TIMEBASE_HZ=1000000
+BSP_DTIM_BASE=0x80000000
+BSP_DTIM_SIZE=0x00100000
+GPS_DEBUG=
+GPS_DEBUG_LEVEL=
+CFLAGS=-march=rv64imafdc_zicsr_zifencei -mabi=lp64d -mcmodel=medany -Os -ffreestanding -fno-builtin -fno-common -Wall -Wextra -I../bsp/include -DBSP_UART_CLOCK_HZ=100000000UL -DBSP_UART_BAUDRATE=115200UL -DBSP_CLINT_TIMEBASE_HZ=1000000UL -DBSP_DTIM_BASE=0x80000000UL -DBSP_DTIM_SIZE=0x00100000UL
+LDFLAGS=-T ../common/linker_ram.ld -nostartfiles -static -Wl,--gc-sections -Wl,--defsym=__dtim_base=0x80000000 -Wl,--defsym=__dtim_size=0x00100000 -Wl,-Map,build/pmod_spi_test.map
+LDLIBS=-Wl,--start-group -lc -lgcc -Wl,--end-group

soc/software/pmod_spi_test/docs/imu_guide_print.css

@@ -0,0 +1,150 @@
+@page {
+  size: A4;
+  margin: 16mm 16mm 18mm 16mm;
+}
+
+html {
+  font-family: "DejaVu Sans", Arial, sans-serif;
+  font-size: 9.5pt;
+  line-height: 1.42;
+  color: #172033;
+}
+
+body {
+  max-width: none;
+  margin: 0;
+}
+
+h1, h2, h3, h4 {
+  color: #24558d;
+  line-height: 1.18;
+  break-after: avoid-page;
+}
+
+h1 {
+  margin-top: 1.15em;
+  padding-bottom: 0.18em;
+  border-bottom: 2px solid #8fb3d9;
+  font-size: 18pt;
+}
+
+h2 {
+  margin-top: 1.0em;
+  font-size: 14pt;
+}
+
+h3 {
+  margin-top: 0.9em;
+  font-size: 11.5pt;
+}
+
+p, li {
+  orphans: 3;
+  widows: 3;
+}
+
+table {
+  width: 100%;
+  border-collapse: collapse;
+  margin: 0.55em 0 0.9em 0;
+  font-size: 8.35pt;
+  break-inside: auto;
+}
+
+thead {
+  display: table-header-group;
+}
+
+tr {
+  break-inside: avoid-page;
+}
+
+th, td {
+  border: 1px solid #9aa9bb;
+  padding: 4px 6px;
+  text-align: left;
+  vertical-align: top;
+}
+
+th {
+  background: #dceafb;
+  color: #173f6c;
+  font-weight: 700;
+}
+
+tbody tr:nth-child(even) td {
+  background: #f6f9fc;
+}
+
+pre {
+  font-family: "DejaVu Sans Mono", monospace;
+  font-size: 8.1pt;
+  line-height: 1.32;
+  background: #f3f6f9;
+  border-left: 4px solid #5c87b5;
+  padding: 7px 9px;
+  white-space: pre-wrap;
+  overflow-wrap: anywhere;
+  break-inside: avoid-page;
+}
+
+code {
+  font-family: "DejaVu Sans Mono", monospace;
+  color: #153f69;
+}
+
+a {
+  color: #1d5f9e;
+  text-decoration: none;
+  overflow-wrap: anywhere;
+}
+
+blockquote {
+  margin-left: 0;
+  padding: 0.2em 0.8em;
+  border-left: 4px solid #91a9c2;
+  background: #f6f8fa;
+}
+
+#title-block-header {
+  min-height: 235mm;
+  display: flex;
+  flex-direction: column;
+  justify-content: center;
+  text-align: center;
+  break-after: page;
+}
+
+#title-block-header h1 {
+  border: 0;
+  color: #173f6c;
+  font-size: 25pt;
+}
+
+#TOC {
+  break-after: page;
+  columns: 2;
+  column-gap: 12mm;
+  font-size: 8.7pt;
+}
+
+#TOC > h2 {
+  column-span: all;
+  font-size: 18pt;
+}
+
+#TOC ul {
+  padding-left: 1.5em;
+}
+
+hr {
+  border: 0;
+  border-top: 1px solid #8ca0b5;
+  margin: 1.5em 0;
+}
+
+@media print {
+  a[href^="http"]::after {
+    content: "";
+  }
+}

soc/software/pmod_spi_test/pmod_spi_test.c

@@ -6,7 +6,7 @@
 #include "bsp/soc.h"
 #include "bsp/uart.h"
 
-/* ICM-42686-P user bank 0 registers. */
+/* ICM-42686-P/ICM-42688-P user bank 0 registers. */
 #define ICM_DEVICE_CONFIG 0x11u
 #define ICM_TEMP_DATA1    0x1du
 #define ICM_INT_STATUS    0x2du
@@ -15,7 +15,11 @@
 #define ICM_ACCEL_CONFIG0 0x50u
 #define ICM_WHO_AM_I      0x75u
 
-#define ICM_WHO_AM_I_VALUE 0x44u
+#define ICM_SPI_READ      0x80u
+#define ICM_SPI_DUMMY     0xffu
+
+#define ICM42686_WHO_AM_I 0x44u
+#define ICM42688_WHO_AM_I 0x47u
 
 static void delay_us(uint32_t us)
 {
@@ -28,35 +32,12 @@ static void delay_us(uint32_t us)
 
 static void icm_write_reg(uint8_t reg, uint8_t value)
 {
-  bsp_pmod_spi_select();
-  delay_us(10u);
-  (void)bsp_pmod_spi_xfer8(reg & 0x7fu);
-  delay_us(10u);
-  (void)bsp_pmod_spi_xfer8(value);
-  delay_us(10u);
-  bsp_pmod_spi_deselect();
-  delay_us(10u);
-}
-
-static void icm_read_regs(uint8_t reg, uint8_t *data, unsigned len)
-{
-  bsp_pmod_spi_select();
-  delay_us(10u);
-  (void)bsp_pmod_spi_xfer8(reg | 0x80u);
-  delay_us(10u);
-  for (unsigned i = 0; i < len; ++i) {
-    data[i] = bsp_pmod_spi_xfer8(0xffu);
-    delay_us(10u);
-  }
-  bsp_pmod_spi_deselect();
-  delay_us(10u);
+  bsp_pmod_spi_write_reg8(reg & (uint8_t)~ICM_SPI_READ, value);
 }
 
 static uint8_t icm_read_reg(uint8_t reg)
 {
-  uint8_t value;
-  icm_read_regs(reg, &value, 1u);
-  return value;
+  return bsp_pmod_spi_read_reg8(reg | ICM_SPI_READ, ICM_SPI_DUMMY);
 }
 
 static int16_t be16(const uint8_t *p)
@@ -67,39 +48,46 @@ static int16_t be16(const uint8_t *p)
 int main(void)
 {
   uint8_t raw[14];
+  long accel_full_scale_mg;
+  long gyro_full_scale_mdps;
 
-  printf("\nICM-42686-P PMOD SPI test\n");
+  printf("\nICM-42686-P/ICM-42688-P PMOD SPI test\n");
   printf("SPI MMIO: 0x%08lx, Genesys2 PMOD JC\n",
          (unsigned long)BSP_PMOD_SPI_BASE);
   printf("pins: CS=JC1 MOSI=JC2 MISO=JC3 SCK=JC4\n");
 
   bsp_pmod_spi_init();
   bsp_pmod_spi_set_mode(BSP_PMOD_SPI_MODE_SINGLE);
+  bsp_pmod_spi_set_timing(10u, 10u, 10u, 10u);
   delay_us(1000u);
 
-  printf("WHO_AM_I before SPI_MODE write:");
+  printf("WHO_AM_I reads:");
+  uint8_t who_am_i = 0u;
   for (unsigned attempt = 0; attempt < 4u; ++attempt) {
-    printf(" %02x", icm_read_reg(ICM_WHO_AM_I));
+    who_am_i = icm_read_reg(ICM_WHO_AM_I);
+    printf(" %02x", who_am_i);
   }
   printf("\n");
 
   /*
-   * The FPGA master is CPOL=0/CPHA=1. ICM-42686-P powers up accepting
-   * modes 0/3, so first switch DEVICE_CONFIG.SPI_MODE to modes 1/2.
-   * A mode-1-master/mode-0-slave write is valid because the slave samples
-   * MOSI on the rising edge, before the master changes it on the falling edge.
+   * Keep DEVICE_CONFIG.SPI_MODE at its reset value. Although the RTL shifts
+   * and samples on the falling edge, board propagation makes it interoperate
+   * with the sensor's default mode-0 timing. Switching the sensor to mode 1
+   * breaks this working timing relationship on the current bitstream.
    */
-  icm_write_reg(ICM_DEVICE_CONFIG, 0x10u);
-  delay_us(100u);
-
   const uint8_t device_config = icm_read_reg(ICM_DEVICE_CONFIG);
-  const uint8_t who_am_i = icm_read_reg(ICM_WHO_AM_I);
-  printf("DEVICE_CONFIG=0x%02x (expected 0x10)\n", device_config);
-  printf("WHO_AM_I=0x%02x (expected 0x%02x): %s\n",
-         who_am_i, ICM_WHO_AM_I_VALUE,
-         who_am_i == ICM_WHO_AM_I_VALUE ? "PASS" : "FAIL");
+  printf("DEVICE_CONFIG=0x%02x (expected 0x00)\n", device_config);
 
-  if (who_am_i != ICM_WHO_AM_I_VALUE) {
+  if (who_am_i == ICM42686_WHO_AM_I) {
+    accel_full_scale_mg = 32000l;
+    gyro_full_scale_mdps = 4000000l;
+    printf("WHO_AM_I=0x%02x: ICM-42686-P PASS\n", who_am_i);
+  } else if (who_am_i == ICM42688_WHO_AM_I) {
+    accel_full_scale_mg = 16000l;
+    gyro_full_scale_mdps = 2000000l;
+    printf("WHO_AM_I=0x%02x: ICM-42688-P PASS\n", who_am_i);
+  } else {
+    printf("WHO_AM_I=0x%02x: FAIL (expected 0x44 or 0x47)\n", who_am_i);
     printf("SPI communication failed. DK J4: CS=1 SCK=2 MOSI=3 MISO=4 GND=7.\n");
     printf("Hold the DK SAMG55 in reset so it cannot contend for the sensor SPI bus.\n");
     bsp_uart_wait_tx_idle();
@@ -115,11 +103,14 @@ int main(void)
   const uint8_t accel_cfg = icm_read_reg(ICM_ACCEL_CONFIG0);
   printf("PWR_MGMT0=0x%02x GYRO_CONFIG0=0x%02x ACCEL_CONFIG0=0x%02x\n",
          pwr, gyro_cfg, accel_cfg);
-  printf("units: temperature=mC accel=mg gyro=mdps (default +/-32g, +/-4000dps)\n");
+  printf("units: temperature=mC accel=mg gyro=mdps\n");
 
   for (unsigned sample = 0; sample < 40u; ++sample) {
     const uint8_t status = icm_read_reg(ICM_INT_STATUS);
-    icm_read_regs(ICM_TEMP_DATA1, raw, sizeof(raw));
+    bsp_pmod_spi_read_regs(ICM_TEMP_DATA1 | ICM_SPI_READ,
+                           ICM_SPI_DUMMY,
+                           raw,
+                           sizeof(raw));
 
     const int16_t temp = be16(&raw[0]);
     const int16_t ax = be16(&raw[2]);
@@ -130,12 +121,12 @@ int main(void)
     const int16_t gz = be16(&raw[12]);
 
     const long temp_mc = 25000l + (long)(((int64_t)temp * 100000) / 13248);
-    const long ax_mg = (long)(((int64_t)ax * 32000) / 32768);
-    const long ay_mg = (long)(((int64_t)ay * 32000) / 32768);
-    const long az_mg = (long)(((int64_t)az * 32000) / 32768);
-    const long gx_mdps = (long)(((int64_t)gx * 4000000) / 32768);
-    const long gy_mdps = (long)(((int64_t)gy * 4000000) / 32768);
-    const long gz_mdps = (long)(((int64_t)gz * 4000000) / 32768);
+    const long ax_mg = (long)(((int64_t)ax * accel_full_scale_mg) / 32768);
+    const long ay_mg = (long)(((int64_t)ay * accel_full_scale_mg) / 32768);
+    const long az_mg = (long)(((int64_t)az * accel_full_scale_mg) / 32768);
+    const long gx_mdps = (long)(((int64_t)gx * gyro_full_scale_mdps) / 32768);
+    const long gy_mdps = (long)(((int64_t)gy * gyro_full_scale_mdps) / 32768);
+    const long gz_mdps = (long)(((int64_t)gz * gyro_full_scale_mdps) / 32768);
 
     printf("%02u st=%02x T=%ld A=%ld,%ld,%ld G=%ld,%ld,%ld\n",
            sample, status, temp_mc,
@@ -143,7 +134,7 @@ int main(void)
     delay_us(100000u);
   }
 
-  printf("ICM-42686-P read complete\n");
+  printf("IMU read complete\n");
   bsp_uart_wait_tx_idle();
   return 0;
 }