// Generated by CIRCT firtool-1.151.0
module CLINTClockSinkDomain(
  output        auto_clint_in_a_ready,
  input         auto_clint_in_a_valid,
  input  [2:0]  auto_clint_in_a_bits_opcode,
  input  [1:0]  auto_clint_in_a_bits_size,
  input  [5:0]  auto_clint_in_a_bits_source,
  input  [25:0] auto_clint_in_a_bits_address,
  input  [7:0]  auto_clint_in_a_bits_mask,
  input  [63:0] auto_clint_in_a_bits_data,
  input         auto_clint_in_d_ready,
  output        auto_clint_in_d_valid,
  output [2:0]  auto_clint_in_d_bits_opcode,
  output [1:0]  auto_clint_in_d_bits_size,
  output [5:0]  auto_clint_in_d_bits_source,
  output [63:0] auto_clint_in_d_bits_data,
  output        auto_int_in_clock_xing_out_sync_0,
                auto_int_in_clock_xing_out_sync_1,
  input         auto_clock_in_clock,
                auto_clock_in_reset,
                tick,
  output        clock,
                reset
);

  wire _clint_auto_int_out_0;
  wire _clint_auto_int_out_1;
  CLINT clint (
    .clock                  (auto_clock_in_clock),
    .reset                  (auto_clock_in_reset),
    .auto_int_out_0         (_clint_auto_int_out_0),
    .auto_int_out_1         (_clint_auto_int_out_1),
    .auto_in_a_ready        (auto_clint_in_a_ready),
    .auto_in_a_valid        (auto_clint_in_a_valid),
    .auto_in_a_bits_opcode  (auto_clint_in_a_bits_opcode),
    .auto_in_a_bits_size    (auto_clint_in_a_bits_size),
    .auto_in_a_bits_source  (auto_clint_in_a_bits_source),
    .auto_in_a_bits_address (auto_clint_in_a_bits_address),
    .auto_in_a_bits_mask    (auto_clint_in_a_bits_mask),
    .auto_in_a_bits_data    (auto_clint_in_a_bits_data),
    .auto_in_d_ready        (auto_clint_in_d_ready),
    .auto_in_d_valid        (auto_clint_in_d_valid),
    .auto_in_d_bits_opcode  (auto_clint_in_d_bits_opcode),
    .auto_in_d_bits_size    (auto_clint_in_d_bits_size),
    .auto_in_d_bits_source  (auto_clint_in_d_bits_source),
    .auto_in_d_bits_data    (auto_clint_in_d_bits_data),
    .io_rtcTick             (tick)
  );
  IntSyncCrossingSource_n1x2 intsource (
    .clock           (auto_clock_in_clock),
    .reset           (auto_clock_in_reset),
    .auto_in_0       (_clint_auto_int_out_0),
    .auto_in_1       (_clint_auto_int_out_1),
    .auto_out_sync_0 (auto_int_in_clock_xing_out_sync_0),
    .auto_out_sync_1 (auto_int_in_clock_xing_out_sync_1)
  );
  assign clock = auto_clock_in_clock;
  assign reset = auto_clock_in_reset;
endmodule