onur/gps
0
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
df563aa207ab487e5c4a1ffa6725e4da6f408fcc
gps/soc/software/pmod_spi_test/pmod_spi_test.c
T

542 lines
16 KiB
C
Raw Blame History

#include <stdint.h>
#include <stdio.h>
#include "bsp/mmio.h"
#include "bsp/pmod_spi.h"
#include "bsp/soc.h"
#include "bsp/uart.h"
/* ICM-42686-P/ICM-42688-P user bank 0 registers. */
#define ICM_DEVICE_CONFIG 0x11u
#define ICM_TEMP_DATA1 0x1du
#define ICM_INT_STATUS 0x2du
#define ICM_PWR_MGMT0 0x4eu
#define ICM_GYRO_CONFIG0 0x4fu
#define ICM_ACCEL_CONFIG0 0x50u
#define ICM_GYRO_CONFIG1 0x51u
#define ICM_GYRO_ACCEL_CONFIG0 0x52u
#define ICM_ACCEL_CONFIG1 0x53u
#define ICM_INT_SOURCE0 0x65u
#define ICM_WHO_AM_I 0x75u
#define ICM_SPI_READ 0x80u
#define ICM_SPI_DUMMY 0xffu
#define ICM_DATA_READY 0x08u
#define ICM42686_WHO_AM_I 0x44u
#define ICM42688_WHO_AM_I 0x47u
#define ICM_ODR_500HZ 0x0fu
#define ICM_PWR_LOW_NOISE 0x0fu
#define ICM_FILTER_BW_12P5HZ 0x77u
#define CALIBRATION_SAMPLES 2500u
#define CALIBRATION_DISCARD 100u
#define CALIBRATION_ATTEMPTS 3u
#define CALIBRATION_TIMEOUT_S 8u
#define REPORT_PERIOD_MS 500u
#ifndef REPORT_DURATION_S
#define REPORT_DURATION_S 60u
#endif
#define REPORT_COUNT ((REPORT_DURATION_S * 1000u) / REPORT_PERIOD_MS)
#define IMU_AXIS_COUNT 6u
#define IMU_FIELD_COUNT 7u
typedef enum {
CAPTURE_IDLE = 0,
CAPTURE_CALIBRATION,
CAPTURE_RUN
} capture_mode_t;
typedef struct {
int16_t temperature;
int16_t accel[3];
int16_t gyro[3];
} imu_raw_sample_t;
static volatile capture_mode_t capture_mode = CAPTURE_IDLE;
static volatile uint32_t calibration_discard;
static volatile uint32_t calibration_count;
static volatile int64_t calibration_sum[IMU_AXIS_COUNT];
static volatile uint64_t calibration_sum_sq[IMU_AXIS_COUNT];
static volatile uint32_t run_window_count;
static volatile uint32_t run_total_count;
static volatile int64_t run_window_sum[IMU_FIELD_COUNT];
static volatile uint32_t invalid_sample_count;
static int32_t accel_bias_raw[3];
static int32_t gyro_bias_raw[3];
static int32_t gyro_full_scale_mdps;
static uint64_t time_now(void)
{
return bsp_read64(BSP_CLINT_MTIME);
}
static uint64_t ticks_from_ms(uint32_t ms)
{
return ((uint64_t)BSP_CLINT_TIMEBASE_HZ * ms + 999u) / 1000u;
}
static void delay_us(uint32_t us)
{
const uint64_t ticks =
((uint64_t)BSP_CLINT_TIMEBASE_HZ * us + 999999u) / 1000000u;
const uint64_t start = time_now();
while ((time_now() - start) < ticks) {
}
}
static void delay_ms(uint32_t ms)
{
const uint64_t ticks = ticks_from_ms(ms);
const uint64_t start = time_now();
while ((time_now() - start) < ticks) {
}
}
static void icm_write_reg(uint8_t reg, uint8_t value)
{
bsp_pmod_spi_write_reg8(reg & (uint8_t)~ICM_SPI_READ, value);
}
static uint8_t icm_read_reg(uint8_t reg)
{
return bsp_pmod_spi_read_reg8(reg | ICM_SPI_READ, ICM_SPI_DUMMY);
}
static int16_t be16(const uint8_t *p)
{
return (int16_t)(((uint16_t)p[0] << 8) | p[1]);
}
static void icm_read_sample(imu_raw_sample_t *sample)
{
uint8_t raw[14];
bsp_pmod_spi_read_regs(ICM_TEMP_DATA1 | ICM_SPI_READ,
ICM_SPI_DUMMY,
raw,
sizeof(raw));
sample->temperature = be16(&raw[0]);
sample->accel[0] = be16(&raw[2]);
sample->accel[1] = be16(&raw[4]);
sample->accel[2] = be16(&raw[6]);
sample->gyro[0] = be16(&raw[8]);
sample->gyro[1] = be16(&raw[10]);
sample->gyro[2] = be16(&raw[12]);
}
static int sample_valid(const imu_raw_sample_t *sample)
{
if (sample->temperature == INT16_MIN) {
return 0;
}
for (unsigned i = 0; i < 3u; ++i) {
if ((sample->accel[i] == INT16_MIN) ||
(sample->gyro[i] == INT16_MIN)) {
return 0;
}
}
return 1;
}
static void capture_sample(const imu_raw_sample_t *sample)
{
if (!sample_valid(sample)) {
invalid_sample_count++;
return;
}
if (capture_mode == CAPTURE_CALIBRATION) {
if (calibration_discard != 0u) {
calibration_discard--;
return;
}
if (calibration_count < CALIBRATION_SAMPLES) {
const int32_t values[IMU_AXIS_COUNT] = {
sample->accel[0], sample->accel[1], sample->accel[2],
sample->gyro[0], sample->gyro[1], sample->gyro[2]
};
for (unsigned i = 0; i < IMU_AXIS_COUNT; ++i) {
calibration_sum[i] += values[i];
calibration_sum_sq[i] += (uint64_t)((int64_t)values[i] * values[i]);
}
calibration_count++;
}
return;
}
if (capture_mode == CAPTURE_RUN) {
run_window_sum[0] += sample->temperature;
run_window_sum[1] += sample->accel[0];
run_window_sum[2] += sample->accel[1];
run_window_sum[3] += sample->accel[2];
run_window_sum[4] += sample->gyro[0];
run_window_sum[5] += sample->gyro[1];
run_window_sum[6] += sample->gyro[2];
run_window_count++;
run_total_count++;
}
}
static int poll_data_ready(void)
{
if ((icm_read_reg(ICM_INT_STATUS) & ICM_DATA_READY) == 0u) {
return 0;
}
imu_raw_sample_t sample;
icm_read_sample(&sample);
capture_sample(&sample);
return 1;
}
static int64_t divide_round_nearest(int64_t numerator, int64_t denominator)
{
if (numerator >= 0) {
return (numerator + denominator / 2) / denominator;
}
return -((-numerator + denominator / 2) / denominator);
}
static uint64_t integer_sqrt(uint64_t value)
{
uint64_t result = 0u;
uint64_t bit = UINT64_C(1) << 62;
while (bit > value) {
bit >>= 2;
}
while (bit != 0u) {
if (value >= result + bit) {
value -= result + bit;
result = (result >> 1) + bit;
} else {
result >>= 1;
}
bit >>= 2;
}
return result;
}
static void reset_calibration_capture(void)
{
capture_mode = CAPTURE_IDLE;
calibration_discard = CALIBRATION_DISCARD;
calibration_count = 0u;
for (unsigned i = 0; i < IMU_AXIS_COUNT; ++i) {
calibration_sum[i] = 0;
calibration_sum_sq[i] = 0u;
}
capture_mode = CAPTURE_CALIBRATION;
}
static int wait_for_calibration(void)
{
const uint64_t timeout_ticks =
(uint64_t)BSP_CLINT_TIMEBASE_HZ * CALIBRATION_TIMEOUT_S;
const uint64_t start = time_now();
while (calibration_count < CALIBRATION_SAMPLES) {
(void)poll_data_ready();
if ((time_now() - start) >= timeout_ticks) {
return 0;
}
}
return 1;
}
static int calculate_calibration(void)
{
int64_t sum[IMU_AXIS_COUNT];
uint64_t sum_sq[IMU_AXIS_COUNT];
int64_t mean[IMU_AXIS_COUNT];
uint64_t sigma[IMU_AXIS_COUNT];
const int64_t accel_counts_per_g = 16384;
capture_mode = CAPTURE_IDLE;
for (unsigned i = 0; i < IMU_AXIS_COUNT; ++i) {
sum[i] = calibration_sum[i];
sum_sq[i] = calibration_sum_sq[i];
}
for (unsigned i = 0; i < IMU_AXIS_COUNT; ++i) {
mean[i] = divide_round_nearest(sum[i], CALIBRATION_SAMPLES);
const uint64_t mean_square = sum_sq[i] / CALIBRATION_SAMPLES;
const uint64_t square_of_mean = (uint64_t)(mean[i] * mean[i]);
const uint64_t variance =
mean_square > square_of_mean ? mean_square - square_of_mean : 0u;
sigma[i] = integer_sqrt(variance);
}
const uint64_t accel_norm = integer_sqrt(
(uint64_t)(mean[0] * mean[0]) +
(uint64_t)(mean[1] * mean[1]) +
(uint64_t)(mean[2] * mean[2]));
const uint64_t accel_sigma_limit = (uint64_t)accel_counts_per_g / 50u;
const uint64_t gyro_sigma_limit =
(uint64_t)divide_round_nearest((int64_t)32768 * 1000,
gyro_full_scale_mdps);
const int64_t gyro_mean_limit =
divide_round_nearest((int64_t)32768 * 2000, gyro_full_scale_mdps);
int stable =
(accel_norm >= (uint64_t)(accel_counts_per_g * 8 / 10)) &&
(accel_norm <= (uint64_t)(accel_counts_per_g * 12 / 10));
for (unsigned i = 0; i < 3u; ++i) {
if ((sigma[i] > accel_sigma_limit) ||
(sigma[i + 3u] > gyro_sigma_limit) ||
(mean[i + 3u] < -gyro_mean_limit) ||
(mean[i + 3u] > gyro_mean_limit)) {
stable = 0;
}
}
printf("cal raw mean A=%ld,%ld,%ld G=%ld,%ld,%ld norm=%lu\n",
(long)mean[0], (long)mean[1], (long)mean[2],
(long)mean[3], (long)mean[4], (long)mean[5],
(unsigned long)accel_norm);
printf("cal raw sigma A=%lu,%lu,%lu G=%lu,%lu,%lu: %s\n",
(unsigned long)sigma[0], (unsigned long)sigma[1],
(unsigned long)sigma[2], (unsigned long)sigma[3],
(unsigned long)sigma[4], (unsigned long)sigma[5],
stable ? "PASS" : "MOVING/UNSTABLE");
if (!stable || (accel_norm == 0u)) {
return 0;
}
for (unsigned i = 0; i < 3u; ++i) {
const int64_t expected_gravity = divide_round_nearest(
mean[i] * accel_counts_per_g, (int64_t)accel_norm);
accel_bias_raw[i] = (int32_t)(mean[i] - expected_gravity);
gyro_bias_raw[i] = (int32_t)mean[i + 3u];
}
printf("cal bias raw A=%ld,%ld,%ld G=%ld,%ld,%ld\n",
(long)accel_bias_raw[0], (long)accel_bias_raw[1],
(long)accel_bias_raw[2], (long)gyro_bias_raw[0],
(long)gyro_bias_raw[1], (long)gyro_bias_raw[2]);
return 1;
}
static void reset_run_capture(void)
{
capture_mode = CAPTURE_IDLE;
run_window_count = 0u;
run_total_count = 0u;
for (unsigned i = 0; i < IMU_FIELD_COUNT; ++i) {
run_window_sum[i] = 0;
}
capture_mode = CAPTURE_RUN;
}
static uint32_t take_run_window(int64_t sum[IMU_FIELD_COUNT],
uint32_t *total_count)
{
const uint32_t count = run_window_count;
for (unsigned i = 0; i < IMU_FIELD_COUNT; ++i) {
sum[i] = run_window_sum[i];
run_window_sum[i] = 0;
}
run_window_count = 0u;
*total_count = run_total_count;
return count;
}
static void print_run_window(unsigned report_index)
{
int64_t sum[IMU_FIELD_COUNT];
uint32_t total_count;
const uint32_t count = take_run_window(sum, &total_count);
if (count == 0u) {
printf("%02u.%03us n=0 total=%u NO POLLING DATA\n",
(report_index * REPORT_PERIOD_MS) / 1000u,
(report_index * REPORT_PERIOD_MS) % 1000u,
total_count);
return;
}
double mean[IMU_FIELD_COUNT];
for (unsigned i = 0; i < IMU_FIELD_COUNT; ++i) {
mean[i] = (double)sum[i] / (double)count;
}
const double temperature_c = 25.0 + mean[0] / 132.48;
const double ax_g = (mean[1] - (double)accel_bias_raw[0]) / 16384.0;
const double ay_g = (mean[2] - (double)accel_bias_raw[1]) / 16384.0;
const double az_g = (mean[3] - (double)accel_bias_raw[2]) / 16384.0;
const double gyro_scale_dps = (double)gyro_full_scale_mdps / 1000.0;
const double gx_dps =
(mean[4] - (double)gyro_bias_raw[0]) * gyro_scale_dps / 32768.0;
const double gy_dps =
(mean[5] - (double)gyro_bias_raw[1]) * gyro_scale_dps / 32768.0;
const double gz_dps =
(mean[6] - (double)gyro_bias_raw[2]) * gyro_scale_dps / 32768.0;
printf("%02u.%03u s | samples=%3u total=%5u | "
"Temp=%6.3f C | "
"Accel[g] X=% .3f Y=% .3f Z=% .3f | "
"Gyro[dps] X=% .3f Y=% .3f Z=% .3f\n",
(report_index * REPORT_PERIOD_MS) / 1000u,
(report_index * REPORT_PERIOD_MS) % 1000u,
count, total_count, temperature_c,
ax_g, ay_g, az_g, gx_dps, gy_dps, gz_dps);
}
int main(void)
{
uint8_t gyro_config0;
uint8_t accel_config0;
printf("\nICM PMOD 500 Hz SPI polling test\n");
printf("SPI=0x%08lx Genesys2 PMOD JC\n",
(unsigned long)BSP_PMOD_SPI_BASE);
printf("SPI pins: CS=JC1 MOSI=JC2 MISO=JC3 SCK=JC4\n");
printf("INT1/JC9 is not used; samples are read by polling INT_STATUS.\n");
bsp_pmod_spi_init();
bsp_pmod_spi_set_mode(BSP_PMOD_SPI_MODE_SINGLE);
bsp_pmod_spi_set_clock_mode(BSP_PMOD_SPI_CLOCK_MODE0);
bsp_pmod_spi_set_timing(10u, 10u, 10u, 10u);
delay_us(1000u);
const uint8_t who_am_i = icm_read_reg(ICM_WHO_AM_I);
const uint8_t device_config = icm_read_reg(ICM_DEVICE_CONFIG);
if (who_am_i == ICM42688_WHO_AM_I) {
gyro_config0 = (7u << 5) | ICM_ODR_500HZ;
accel_config0 = (3u << 5) | ICM_ODR_500HZ;
gyro_full_scale_mdps = 15625;
printf("WHO_AM_I=0x%02x ICM-42688-P\n", who_am_i);
} else if (who_am_i == ICM42686_WHO_AM_I) {
gyro_config0 = (7u << 5) | ICM_ODR_500HZ;
accel_config0 = (4u << 5) | ICM_ODR_500HZ;
gyro_full_scale_mdps = 31250;
printf("WHO_AM_I=0x%02x ICM-42686-P\n", who_am_i);
} else {
printf("WHO_AM_I=0x%02x FAIL (expected 0x44 or 0x47)\n", who_am_i);
bsp_uart_wait_tx_idle();
return 1;
}
if (device_config != 0x00u) {
printf("DEVICE_CONFIG=0x%02x FAIL (SPI mode must remain 0)\n",
device_config);
bsp_uart_wait_tx_idle();
return 1;
}
/* Configuration registers are changed while accel and gyro are off. */
delay_ms(50u);
icm_write_reg(ICM_PWR_MGMT0, 0x00u);
delay_ms(1u);
icm_write_reg(ICM_INT_SOURCE0, 0x00u);
icm_write_reg(ICM_GYRO_CONFIG0, gyro_config0);
icm_write_reg(ICM_ACCEL_CONFIG0, accel_config0);
/* Third-order UI/DEC2 filters and 12.5 Hz LPF at a 500 Hz ODR. */
const uint8_t gyro_config1 =
(icm_read_reg(ICM_GYRO_CONFIG1) & 0x10u) | 0xcau;
const uint8_t accel_config1 =
(icm_read_reg(ICM_ACCEL_CONFIG1) & 0xe1u) | 0x14u;
icm_write_reg(ICM_GYRO_CONFIG1, gyro_config1);
icm_write_reg(ICM_ACCEL_CONFIG1, accel_config1);
icm_write_reg(ICM_GYRO_ACCEL_CONFIG0, ICM_FILTER_BW_12P5HZ);
/* Do not route data-ready to INT1; this test uses SPI polling only. */
icm_write_reg(ICM_INT_SOURCE0, 0x00u);
icm_write_reg(ICM_PWR_MGMT0, ICM_PWR_LOW_NOISE);
delay_ms(50u);
printf("CFG PWR=%02x GYRO=%02x ACCEL=%02x FILT=%02x G1=%02x A1=%02x\n",
icm_read_reg(ICM_PWR_MGMT0), icm_read_reg(ICM_GYRO_CONFIG0),
icm_read_reg(ICM_ACCEL_CONFIG0),
icm_read_reg(ICM_GYRO_ACCEL_CONFIG0),
icm_read_reg(ICM_GYRO_CONFIG1), icm_read_reg(ICM_ACCEL_CONFIG1));
printf("POLL INT_SOURCE0=%02x (expected 00: INT1 disabled)\n",
icm_read_reg(ICM_INT_SOURCE0));
if ((icm_read_reg(ICM_PWR_MGMT0) != ICM_PWR_LOW_NOISE) ||
(icm_read_reg(ICM_GYRO_CONFIG0) != gyro_config0) ||
(icm_read_reg(ICM_ACCEL_CONFIG0) != accel_config0) ||
(icm_read_reg(ICM_GYRO_ACCEL_CONFIG0) != ICM_FILTER_BW_12P5HZ) ||
(icm_read_reg(ICM_INT_SOURCE0) != 0x00u)) {
printf("Sensor configuration read-back failed\n");
bsp_uart_wait_tx_idle();
return 1;
}
/* Clear any stale data-ready status before polling starts. */
(void)icm_read_reg(ICM_INT_STATUS);
capture_mode = CAPTURE_IDLE;
printf("Keep the board motionless for calibration; starting in 3 seconds.\n");
delay_ms(3000u);
int calibrated = 0;
for (unsigned attempt = 1u;
(attempt <= CALIBRATION_ATTEMPTS) && !calibrated;
++attempt) {
printf("Calibration %u/%u: collecting %u samples (5 s)...\n",
attempt, CALIBRATION_ATTEMPTS, CALIBRATION_SAMPLES);
reset_calibration_capture();
if (!wait_for_calibration()) {
printf("Calibration timeout: got %u/%u polling samples.\n",
calibration_count, CALIBRATION_SAMPLES);
const uint8_t status = icm_read_reg(ICM_INT_STATUS);
printf("DIAG INT_STATUS=%02x PWR=%02x\n", status,
icm_read_reg(ICM_PWR_MGMT0));
break;
}
calibrated = calculate_calibration();
}
if (!calibrated) {
capture_mode = CAPTURE_IDLE;
icm_write_reg(ICM_PWR_MGMT0, 0x00u);
delay_ms(1u);
icm_write_reg(ICM_INT_SOURCE0, 0x00u);
printf("Calibration failed; keep the kit still and restart the test.\n");
bsp_uart_wait_tx_idle();
return 1;
}
printf("Starting %u s capture: 500 Hz SPI polling, UART every 500 ms.\n",
(unsigned)REPORT_DURATION_S);
printf("Each line is the average of samples read in that 500 ms window.\n");
reset_run_capture();
const uint64_t run_start = time_now();
const uint64_t report_ticks = ticks_from_ms(REPORT_PERIOD_MS);
for (unsigned report = 1u; report <= REPORT_COUNT; ++report) {
const uint64_t deadline = run_start + (uint64_t)report * report_ticks;
while (time_now() < deadline) {
(void)poll_data_ready();
}
print_run_window(report);
}
capture_mode = CAPTURE_IDLE;
icm_write_reg(ICM_PWR_MGMT0, 0x00u);
delay_ms(1u);
icm_write_reg(ICM_INT_SOURCE0, 0x00u);
(void)icm_read_reg(ICM_INT_STATUS);
printf("Complete: samples=%u expected<=%u invalid=%u\n",
run_total_count, 500u * REPORT_DURATION_S,
invalid_sample_count);
bsp_uart_wait_tx_idle();
return 0;
}
Reference in New Issue View Git Blame Copy Permalink